LEVEL MEASUREMENT

Level Measurement Manufacturers and Suppliers

Material Level Sensor Switch Tilt

Application :

TILT SWITCH is an electronic device specially developed for sensing the level of an approaching stockpile on stacker-reclaimed or material in a hopper, in a silo and to provide an output signal which can be used to initiate control actions.

Construction :

Standard Specification :

Supply	110 / 240 V AC, 50 Hz. 1Phase (Please specify)
OFF Delay	1 to 10Secs. (Continuously adjustable)
ON Delay	1 to 10Secs.(Continuously adjustable)
Output Contacts	2C / O at 5A resistive, at 240V, 50 Hz
Sensor Probe	38mm 0 X 250mm long (approx.)
Enclosure	For control unit Din Rail IP30/ Weather proof IP65

Viabrating fork type level switch

Area of Application

Features

No calibration required, simple to install
Performance independent of material characteristics i.e. change in conductivity, moisture, dielectric constant etc.
No moving parts hence no ware and tear
Weatherproof enclosure, SS316 for food industry
Field Selectable operation Logic : Configurable high or low point switching

Material Size	up to 10mm
Material bulk density	0.05 kg / dm3 minimum
Operating Pressure	10Kg / Cm2max
Fork length	Standard 250mm, other length of fork up to 3000mm are available. Please specify
Output	2C / O relay contacts rated for 5 Amp res at 230V AC
Supply	230V AC, 110V Ac 50Hz or 24V DC please specify
Ambient Temperature	60 degree for integral switching unit
Enclosure	Cast Aluminium, IP65 integral with probe (standard) or back panel mounting

Paddle type level switch

Paddle type level switch is a simple but reliable switch for level control of wide variety of free flowing solids. Paddle type switches consists of motor which drives a paddle through a planetary gearbox arrangement. When level of the solid reaches the rotating paddle, it tends to stall the latter. Micro switches are actuated to provided level interlocks.

Features

Specially designed motor which does not burn under locked rotor condition.
Specially designed PTFE lip seal to prevent ingress of dust particles into main enclosure.
Field replaceable paddle assembly to suit various applications.

Mounting	Flanged Standard: 204mm Dia, 10mm thick with 6 holes of 10mm diameter on 178pcd. Please specify any other if required
Shaft Extension	Up to 1000mm for side mounitg, Up to 300mm for top mounting
Drive motor Type	Shaded pole, Insulation class B
Power	15VA approx
Paddle Speed	Approx:4-5rpm. Various paddle shapes are available
Output	1C/O contact rated for 5Amp resistive at 230V AC With suitable cast Al enclosure for field mounting and terminations of cables IP65
Power Supply	230V AC, 110V AC 50 Hz / 24V DC

Level Measurement Manufacturers, Suppliers, Exporters & Distributors in India

Safety Switch

Proximity Switch

Served Area:

Export Country: